All the technical documentation in one place
Data sheets by machine, range brochures, sizing guides and maintenance documents: a single point of access, rather than documentation scattered from page to page.
The documents listed below make up the target documentation plan. Each data sheet must be prepared by the SOTIC design office from the real characteristics of the equipment manufactured, then approved before going online. Links will be activated as the PDF files are produced.
Documents available and forthcoming
SOTIC corporate brochure
Presentation of the company, its trades, the sectors served and its approach to supporting clients.
General equipment catalogue
All machines by sector, with capacity ranges, power ratings and footprints.
Data sheets — cassava range
Washer-peeler, grater, hydraulic and continuous presses, cake breaker, roaster, dryer, starch line.
Data sheets — coffee & cocoa range
Pod breaker, pulper, fermentation boxes, indirect dryer, roaster, cracker-winnower, liquor mill.
Data sheets — cashew range
Sizer, steam cooker, sheller, oven, peeling machine, grading table, packing machine.
Data sheets — rubber range
Coagulation tanks, pre-grinder, creper mill, granulator, trolley dryer, baling press.
Data sheets — oil palm range
Steriliser, bunch stripper, digester, screw press, clarifier, dryer, nut cracker and kernel press.
Data sheets — cereals & fruit range
Thresher-winnower, cleaner-separator, huller, hammer mill, modular dryer, crusher-refiner, pasteuriser.
Data sheets — farm mechanisation
Tractors, power tillers, disc ploughs and harrows, subsoilers, seed drills, flail mowers, trailers, pumping.
Guide — sizing a processing unit
Method for material and energy balances, preliminary questionnaire, common sizing mistakes.
Guide — preparing the civil works for a production line
Blocks, slabs, networks, ventilation, zone separation, cast-in items and coordination with erection.
Model preventive maintenance plan
Greasing intervals, tension and alignment checks, safety points, intervention log.
Typical wear-part list by range
Components to hold on site, estimated service life, equivalent references available locally.
Annual activity report
Corporate document: activity, projects, headcount, outlook.
Certificates and qualifications
Administrative documents and professional qualifications useful for tender submissions.
What a useful data sheet must contain
A data sheet is not an illustrated sales pitch. It is the document that lets a buyer verify that a machine suits their need, prepare its installation and anticipate its operation. We apply a constant structure to all our sheets.
- Purpose and operating principle, with a diagram of the working member.
- Capacity range, stating the conditions under which the throughput was recorded.
- Installed power and absorbed power in normal running, clearly distinguished.
- Footprint, weight and loads transmitted to the ground, for sizing the foundation block.
- Materials in contact with the product and surface treatments of the structure.
- Utilities required: electricity, water, steam, compressed air, drainage.
- Wear parts, estimated service life and availability of spares.
- Safety devices and operating conditions to be observed.
Need a document that is not listed?
Model quotation, calculation note, reference of a comparable installation, administrative certificate for a tender file: documentation requests are handled by our technical department.
Make a requestDocuments published online are compressed and optimised for fast downloading, including over a mobile connection.
A data sheet is not a study
Sheets give the characteristics of a machine. Choosing the right machine depends on your raw material and your supply. Let's talk about it.
